FGI is making free six-part short course available to public
October 16th, 2018
The Fabricated Geomembrane (FGI) is releasing the presentations from the Aug. 3 “Geosynthetics in Civil Engineering Applications” short course as a six-part webinar series. Three webinars have been released, and three more will be released in the next few weeks. The webinars and release dates are: “Service Life of Geomembranes” by R. Kerry Rowe (9/11/18) “Testing […]
Leister introduces SEAMTEK W-900 AT low-voltage wedge welder
October 12th, 2018
Leister Technical Textiles has released the SEAMTEK W-900 AT low-voltage wedge welder, an energy efficient and safe welder with direct transmission of power to a thin welding wedge. The W-900 welds at a speed of 98 feet (30 m) per minute, uses no energy when in standby mode, can reach the desired target temperature in […]
Owens Corning to present webinar on geosynthetic leachate reduction
October 9th, 2018
Owens Corning will host a free webinar “Geosynthetic Solutions for Waste Facility Leachate Reduction” on Oct. 11 from 1 p.m. to 2 p.m. CDT. The webinar will be taught by Andy Durham, senior geosynthetics engineer with Owens Corning. Managing landfills and waste disposal sites is challenging, especially as environmental regulations seem to constantly change. Geosynthetic […]
HUESKER to host webinar on GEC systems
October 8th, 2018
HUESKER will host a free webinar on geotextile encased columns (GEC) on Oct. 8 at 11 a.m. EDT. Oliver Detert, Head of the Engineering Department at HUESKER, will lead the webinar. The geotextile sleeve allows the accommodation of high vertical loads by compensating for the lack of lateral support to the granular columns from the […]
FHWA video features GRS–IBS history and construction techniques
October 5th, 2018
A Federal Highway Administration (FHWA) YouTube video showcases the history and construction techniques of the geosynthetic reinforced soil–integrated bridge system (GRS–IBS). The video illustrates how to build a GRS–IBS. It is intended to educate designers, engineers, contractors and inspectors on the fundamentals of the GRS–IBS. The video follows the GRS–IBS Interim Implementation Guide (FHWA-HRT-11-026). The […]
Two Fleischmann amendments related to geosynthetics included in final FAA reauthorization
October 5th, 2018
Two amendments introduced by Rep. Chuck Fleischmann, R-Tenn., both related to geosynthetics, were included in the final Federal Aviation Administration (FAA) Reauthorization Act of 2019 that was approved by both the House and Senate and sent to the White House. The House passed the legislation in May, and the Senate passed it 93-6 earlier this week. […]
Alger of Lane Construction elected ARTBA chair
October 4th, 2018
Robert E. “Bob” Alger, P.E., president and chief executive officer of Cheshire, Conn.-based The Lane Construction Corporation, has been elected 2018–2019 American Road & Transportation Builders Association (ARTBA) chair. The association made the announcement October 1 at its national convention in New York City. Alger’s entire 40-year career in the transportation construction industry has been spent […]
GSI on-demand online course details designing with geosynthetics
October 2nd, 2018
The Geosynthetic Institute (GSI) is offering an on-demand online course entitled “Designing with Geosynthetics,” based on the book of the same title by Robert M. Koerner. Dr. Koerner, professor emeritus of civil engineering at Drexel University and director emeritus of GSI, teaches the course. All Geosynthetic Materials Association (GMA) member companies and their employees will receive […]
Get listed in the Geosynthetics 2019 Specifier’s Guide
October 1st, 2018
The annual call for listings in the Geosynthetics 2019 Specifier’s Guide opened September 19. Thousands of companies, engineers and government agencies turn to this annual guide to purchase products and services. This comprehensive resource lists suppliers of geotextiles, geomembranes, geogrids, geosynthetic clay liners, drainage materials, geocells and erosion control materials, as well as services related […]
BOSTD America geogrid plant up and running in Oklahoma
September 28th, 2018
BOSTD America’s new geogrid manufacturing plant is operational at the company’s American headquarters in Blackwell, Okla. The BOSTD Group, based in Europe, includes BOSTD International, BOSTD Geosynthetics and BOSTD America. It is a manufacturer of high-quality geogrids produced on a continuous-production line, as well as drainage nets and composites, geocomposites, asphalt reinforcement material and geocells […]